User Settings - Saving Your Preferred Settings - Minelab Explorer SE Quick Start Manual

MAIN MENU > USER > USER SETTINGS
70 USER SETTINGS - Saving Your
Preferred Settings
Changes to detector settings
(e.g. Volume, Tone and Sensitivity),
are automatically saved. The detector
remembers these settings when it shuts
down. However, you may find that
different locations require a separate
combination of settings for maximum
effectiveness.
Two people may have different
preferences (e.g. Threshold, Response)
or perhaps you divide your time
between a couple of very different
detecting environments (e.g. the beach
and a highly-mineralized battlefield).
To save current settings:
Press the shift button next to
SAVE  USER A or USER B.
A screen prompt will appear asking if
you want to save current settings in the
memory. Select OK.
You can now proceed to detect with
these settings, knowing they have
been saved for future use in similar
conditions.
USER SETTINGS provides you with two
sets of memorized settings, USER A and
USER B. These sets can be used as an
alternative to the factory presets. USER
SETTINGS allows you to load your own
defined settings saving you from having
to 'set-up' the detector every time you
turn it on.
To load saved settings:
Press the shift button next to
LOAD  USER A or USER B.
A screen prompt will appear asking
if you want to discard your current
detector settings and load the
memorized settings. Select OK.
Settings will load in approximately
3 seconds.
User Preferences
SETTING RANGE
Sensitivity Mode Semi-Automatic,
Manual
Sensitivity Value 1 to 32
Threshold Volume 0 to 40
Discrimination Function
Discrim, Iron Mask
Iron Mask Value 0 to 31, All Metal
Noise Channel* 1 to 11
Display Type Smartfind, Digital
Display Size Normal, Full Screen
Contrast 1 to 10
Learn Cursor Size Small, Medium,
Large
Edit Frame Size Small, Medium,
Large
Audio Volume Max Limit 0 to 10
Audio Volume Gain 1 to 10
Audio Threshold Tone 1 to 10
Audio Tone Variability 1 to 10
Audio Tone Limits 1 to 10
Audio Sounds
,
CONST CONDUCT
FERROUS
Audio Response
,
NORMAL LONG
,
SMOOTH PITCH
HOLD
Options Recovery Fast On, Off
Options Recovery Deep On, Off
* Noise Channel is selected automatically
by the NOISE CANCEL shortcut button or
manually through MAIN MENU > OPTIONS
The Noise Channel cannot
be saved into USER A or USER B .
Other selections not saved:
Backlight status, Pinpoint.
FACTORY USER A USER B
PRESET
Semi-
Automatic
22
16
Discrim
22
5 x
Smartfind
Normal
5
Large
Small
10
8
5
8
10
,
CONDUCT
,
NORMAL
Off
Off
Restoring Factory Presets will not delete
any saved USER A or B settings.
Restoring factory presets discards all
unsaved adjustments, except the saved
Discrimination Patterns and USER A and
USER B settings.
71
x