Lockit ® Hdmi Cable Lacing Bracket Installation - Extron electronics SW HD 4K PLUS Series User Manual

LockIt HDMI Cable Lacing Bracket Installation
®
The Extron
possible to simply and universally secure a
standard HDMI
NOTE: The HDMI device must have an
To securely fasten an HDMI cable to a device:
1.
2.
3.
4.
5.
LockIt lacing bracket makes it
®
cable to most HDMI devices.
®
HDMI connection mounting screw for
this bracket to be used.
Plug the HDMI cable into the panel
connection.
Loosen the HDMI connection mounting screw
from the panel enough to allow the LockIt
lacing bracket to be placed over it. The screw
does not have to be removed.
Place the LockIt lacing bracket on the screw
and against the HDMI connector, then tighten
the screw to secure the bracket.
Loosely place the included tie wrap around
the HDMI connector and the LockIt lacing
bracket as shown.
While holding the connector securely
against the lacing bracket, tighten the tie wrap, then remove any excess length.
ATTENTION:
• Do not overtighten the HDMI connection mounting screw. The shield to which
it is fastened is very thin and can easily be stripped.
• Ne serrez pas trop la vis de montage du connecteur HDMI. Le blindage auquel
elle est attachée est très fin et peut facilement être dénudé.
1
3
4
3
SW HD 4K PLUS Series • Installation
2
10