Extron electronics SW HD 4K PLUS Series User Manual page 31

Command
Information Requests (continued)
Query model description
Query part number
Query firmware version
Example:
View EDID in hex format
View EDID native resolution
Example
Verbose Mode
Set verbose mode
View verbose mode
Resetting
Reset all device settings to
factory defaults
IP system reset
Reset all settings except IP
settings
Absolute system reset
ASCII Command Response
(Host to Switcher) (Switcher to Host)
2I
HDMI•SWITCHERn•SUPPORT•4K60
In verbose modes 2 and 3:
Inf02*HDMI•SWITCHERn•SUPPORT•4K60
N 60-nnnn-nn
Q X(]
Q
1.01
E X! } X%]
R EDID
In verbose modes 2 and 3:
X! X%]
E X! } X^]
N EDID
E X! }
N EDID 1600x1200 @ 60.0 Hz
EX1@ }
CV Vrb
E } X1@]
CV
In verbose modes 2 and 3:
Vrb
E }
ZXXX Zpx
E }
1ZQQQ Zpq1
E }
ZY Zpy
E }
ZQQQ Zpq
SW HD 4K PLUS Series • Remote Configuration and Control
Additional Description
Show the switcher signal type,
number of inputs, and 4K support.
SWITCHERn = number of inputs
on the unit (2 or 4).
] Show the part number of the
switcher:
SW2 HD 4K PLUS: 60-1603-01
SW4 HD 4K PLUS: 60-1604-01
Show firmware build number
expressed to the second decimal
place.
]
View the current EDID assignment
for input
(256 bytes).
X%
= current EDID information in
hex.
Show native resolution and refresh
rate
applied to input
]
X1@]
Set the verbose mode to
X1@
:
0 = None (default for IP
1 = Verbose mode (default for
2 = Tagged responses for queries
3 = Verbose mode and tagged
View current verbose mode
X1@]
] Reset product-specific settings to
factory default values. Does not
affect IP settings or user files.
]
Reset only IP settings to factory
values.
] Reset all device settings to
factory defaults except IP
settings (communication is
preserved). This command
is recommended for after a
firmware update.
] Reset all device settings to
factory default except firmware
version.
]
]
X(
,
X!
in hexadecimal
X^
of the EDID currently
X!
.
X1@
. For
connection)
USB and RS-232 connections)
responses for queries
X1@
.
23