Extron electronics SW HD 4K PLUS Series User Manual page 29

Command
HDCP Status
View HDCP status for an
input
View HDCP status for all
inputs
View output HDCP status
HDCP Input Authorization
HDCP authorization per
input
Enable or disable HDCP
authorization for all inputs
View HDCP authorization
status for all inputs
Output HDCP Mode
Set the output HDCP mode
View the output HDCP mode
ASCII Command Response
(Host to Switcher) (Switcher to Host)
E X! } X1%]
I HDCP
In verbose modes 2 and 3:
Hdcp I
E } X1%
IHDCP
In verbose modes 2 and 3:
Hdcp I
E } X1^]
OHDCP
In verbose modes 2 and 3:
Hdcp O
E X! X@ }
E * HDCP Hdcp E
E X@ }
E HDCP Hdcp E
E } X@
EHDCP
In verbose modes 2 and 3:
HdcpE
E X1& }
S HDCP Hdcp S
E } X1&]
SHDCP
In verbose modes 2 and 3:
Hdcp S
SW HD 4K PLUS Series • Remote Configuration and Control
Additional Description
Show HDCP status
X!
X1%] X!
number of inputs}.
For
0 = No source detected
1 = Source with HDCP detected
2 = Source without HDCP
detected
X1% X1%]
• •...•
Show HDCP status
inputs.
X1% X1% X1%]
• •...•
Show HDCP status
output.
For
X1^]
0 = No sink detected
1 = Sink with HDCP detected
2 = Sink without HDCP detected
X! X@] Set HDCP authorization for input
*
X!
0 = Disable HDCP authorization
1 = Enable HDCP authorization
X@]
Set HDCP authorization to
all inputs.
X@ X@] View the current HDCP
• •...•
authorization setting
inputs.
X@ X@ X@]
• •...•
X1&] Set the output HDCP mode to
X1&
0 = (Default) Encrypt as required
1 = Always encrypt:
2 = Encrypt as required by input:
3 = Always encrypt: continuous
View HDCP mode
output.
X1&]
X1%
for input
.
= 1 through {maximum
X1%
:
X1%
for all the
X1^
for the
X1^
:
X@ X@
to . For :
(default)
X@
for
X@
for all the
X1&
. For :
by input:
For HDMI sinks, perform
continuous trials.
For DVI sinks, attempt for 10
seconds, then fail.
For HDMI sinks, perform
continuous trials.
For DVI sinks, attempt for 10
seconds, then fail.
continuous trials for HDMI and
DVI sinks.
trials for HDMI and DVI sinks.
X1&
for the
21