Safety Precautions - Winmate R05T100-PMD1HB User Manual

USER MANUAL

Safety Precautions

For your safety carefully read all the safety instructions before using the
device. Keep this user manual for future reference.
 Always disconnect this equipment from any AC outlet before
cleaning. Do not use liquid or spray detergents for cleaning. Use a
damp cloth.
 For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
 Keep this equipment away from humidity.
 Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage.
 The openings on the enclosure are for air convection and to
protect the equipment from overheating.
CAUTION/ATTENTION
Do not cover the openings!
 Before connecting the equipment to the power outlet make sure
the voltage of the power source is correct.
 Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
 If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
 Never pour any liquid into an opening. This could cause fire or
electrical shock.
 Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
 All cautions and warnings on the equipment should be noted.
CAUTION
Always ground yourself to remove any static charge before
touching the board. Modern electronic devices are very sensitive
to static electric charges. As a safety precaution, use a grounding
wrist strap at all times. Place all electronic components in a
static-dissipative surface or static-shielded bag when they are not
in the chassis.
- 7 -
PREFACE