Connecting Peripherals; Vga Connector - Winmate R05T100-PMD1HB User Manual

USER MANUAL

2.4 Connecting Peripherals

The panel control port is designed for monitors that work with a variety of
compatible video sources. Due to the possible deviations between these signal
sources, you may have to make adjustments to the monitor settings from the
OSD menu when switching between these sources.
NOTE:
Notice that standard input terminals include VGA and HDMI. Your
device may be equipped with DVI-D, S-Video or Composite input
terminals based on your order.

2.4.1 VGA Connector

Panel Mount Display uses standard 15pin D-sub connector. Plug 15-pin VGA
signal cable to the VGA connector in the rear of motherboard, and plug the other
end to the monitor. Secure cable connectors with hexagonal copper pillars
M3x4mm.
Pin Assignment and signal names for VGA connector
CHAPTER 2
Pin №
Signal Name
1 RED
3 BLUE
5 GND
7 AGND
9 +5V
11 NC
13 H Sync
15 DDCSCL
- 22 -
INSTALLATION
Pin №
Signal
Name
2 GREEN
4 NC
6 AGND
8 AGND
10 GND
12 DDCSDA
14 V Sync