Panel Mounting - Winmate R05T100-PMD1HB User Manual

USER MANUAL

2.2.1 Panel Mounting

The Panel Mount Display comes with clamp mounts that enable you to install the
unit onto a wall (where space has been cut out to accommodate the rest of the
hardware). Winmate provides VESA by request.
Installation Instruction
1. Make a cutout on the fixture (ex. wall) according to the cutout dimensions
of the display. Based on the drawing, mark screw holes on a front side of
the fixture. Place display on the fixture from the rear side.
2. Install mounting clamps to its location all around the perimeter of the panel
PC
3. Use electric screwdriver to fasten M3 screws from the front side.
4. You complete the installation. Please connect all the peripherals if needed.
❶
❸
CHAPTER 2
❷
❹
- 19 -
INSTALLATION