Cable Mounting Considerations; Connecting Power - Winmate R05T100-PMD1HB User Manual

USER MANUAL

2.2 Cable Mounting Considerations

For a nice look and safe installation, make sure cables are neatly hidden
behind the device.
CAUTION/ ATTENTION
Observe all local installation requirements for connection cable type
and protection level.
Suivre tous les règlements locaux d'installations, de câblage et
niveaux de protection.
CAUTION/ ATTENTION
Turn off the device and disconnect other peripherals before
installation.
Éteindre l'appareil et débrancher tous les périphériques avant
l'installation.

2.3 Connecting Power

This section provides information on how to use connectors on the Panel Mount
Display. Be cautious while working with these modules. Please carefully read the
content of this chapter in order to avoid any damages.
Installation instruction:
1. Connect the AC cord to the AC IN terminal on the AC adaptor.
2. Connect the DC OUT terminal of the AC adaptor to the DC IN terminal on
the monitor.
3. Align the notch on the cord connector with the guiding groove and plug it
in.
4. Connect the AC cord plug to the power outlet.
CHAPTER 2
- 21 -
INSTALLATION