Panel Mount Display 5.7~32” User Manual V1.0 For more information on this and other Winmate products, please visit our website at: www.winmate.com Document Part Number: 91521110101F Please read this instructions before operating the device and retain them for future reference.
USER MANUAL PREFACE PREFACE Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners.
USER MANUAL PREFACE Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance.
Page 5
USER MANUAL PREFACE Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory.
USER MANUAL PREFACE Safety Information WARNING! / AVERTISSEMENT! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.
USER MANUAL PREFACE Safety Precautions For your safety carefully read all the safety instructions before using the device. Keep this user manual for future reference. Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth.
USER MANUAL ABOUT THIS MANUAL ABOUT THIS USER MANUAL This User Manual provides information about using the Winmate® Panel Mount Display. The documentation set provides information for specific user needs, and includes: Panel Mount Display User Manual – contains detailed description on how to use the display, its components and features.
USER MANUAL CHAPTER 1 INTRODUCTION INTRODUCTION This chapter gives you product overview, describes features and hardware specification. You will find all accessories that come with the display device in the packing list. Mechanical dimensions and drawings included in this chapter. - 9 -...
CHAPTER 1 INTRODUCTION CHAPTER 1: INTRODUCTION Congratulations on purchasing Winmate® Panel Mount Display. Versatile display in an open-frame housing designed for rear and VESA mounting with integrated bracket design for KIOSK applications. The Panel Mount Display is a microprocessor-controlled to work with 5.7~32” TFT LCD panel.
19pin Male) 94E0190190P3 9B0000000418 **Notice: Screw bolts provided by Winmate only to be used to screw the display onto a console from the rear side. If you prefer your own bolts, please make sure to use M4 and 30mm in length.
USER MANUAL CHAPTER 1 INTRODUCTION 1.3 Product Overview This section describes physical appearance of the Panel Mount Display. NOTE: Notice that standard input terminals include VGA and HDMI. Your device may be equipped with DVI, S-Video or Composite input terminals based on your order. Notice that input and output connectors vary by product size and specifications.
Page 13
INTRODUCTION Refer to the table below for a unit dimensions. Model Name Dimensions (W x H x D, mm) Cutout (W x H), mm R05T100-PMD1HB 198 x 162 x 41 170 x 138 R06L200-PMA1 218 x 164 x 50.6 191 x 143...
USER MANUAL CHAPTER 1 INTRODUCTION 1.4 OSD Control Panel 1.4.1 Control Buttons OSD control panel varies by product specifications. Type A Icon Function Decrease the value / Select up Increase the value / Select down Power switch Select left Select right / Call main OSD menu - 14 -...
USER MANUAL CHAPTER 1 INTRODUCTION Type B Icon Function Decrease the value / Select up Increase the value / Select down Power switch Exit / Auto adjustment Enter / Call main OSD menu 1.4.2 LED Indicators LED indicators are located on the OSD control panel the rear side of the display. Description Icon Function...
Page 16
USER MANUAL CHAPTER 2 INSTALLATION INSTALLATION This chapter provides hardware installation instructions and mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages. - 16 -...
USER MANUAL CHAPTER 2 INSTALLATION CHAPTER 2: INSTALLATION This chapter provides hardware installation instructions and mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages 2.1 Wiring Requirements The following common safety precautions should be observed before installing any electronic device: ...
USER MANUAL CHAPTER 2 INSTALLATION 2.2 Mounting Guide The Panel Mount Display can be applied for several different installation methods, including panel mounting, bracket mounting, VESA mounting. Refer to sub- sections below for more details. CAUTION/ ATTENTION Follow mounting instructions and use recommended mounting hardware to avoid the risk of injury.
The Panel Mount Display comes with clamp mounts that enable you to install the unit onto a wall (where space has been cut out to accommodate the rest of the hardware). Winmate provides VESA by request. Installation Instruction 1. Make a cutout on the fixture (ex. wall) according to the cutout dimensions of the display.
Panel Mount Display comes with VESA Mount holes for mounting. Installation Instruction: 1. Screw VESA bracket to the fixture (ex. swing arm) with four VESA screws. 2. Place the device on VESA bracket. Notice that VESA stand and mounting kit are not provided by Winmate. - 20 -...
USER MANUAL CHAPTER 2 INSTALLATION 2.2 Cable Mounting Considerations For a nice look and safe installation, make sure cables are neatly hidden behind the device. CAUTION/ ATTENTION Observe all local installation requirements for connection cable type and protection level. Suivre tous les règlements locaux d’installations, de câblage et niveaux de protection.
USER MANUAL CHAPTER 2 INSTALLATION 2.4 Connecting Peripherals The panel control port is designed for monitors that work with a variety of compatible video sources. Due to the possible deviations between these signal sources, you may have to make adjustments to the monitor settings from the OSD menu when switching between these sources.
USER MANUAL CHAPTER 2 INSTALLATION 2.4.2 HDMI Connector Plug HDMI signal cable to the HDMI connector on the rear side of PC system, and plug the other end to the monitor. Pin Assignment and signal names for HDMI connector Pin № Pin №...
USER MANUAL CHAPTER 2 INSTALLATION 2.4.4 S-Video Notice that S-Video is an optional connector and may not be present in your device. Use Mini-DIN connector to connect S-Video to the display. Pin № Pin № Signal Name Signal Name 2.4.5 Composite Video Notice that composite video is an optional connector and may not be present in your device.
Page 25
USER MANUAL CHAPTER 3 OPERATING THE DEVICE OPERATING THE DEVICE This chapter provides detailed information on how to operate the display. - 25 -...
USER MANUAL CHAPTER 3 OPERATING THE DEVICE CHAPTER 3: OPERATING THE DEVICE In this chapter you will find instructions on how to operate the display. 3.1 Turning on the System To turn on the system: 1. Connect the power adapter cable to the DC IN of the display. 2.
USER MANUAL CHAPTER 3 OPERATING THE DEVICE 3.2 OSD Menu Navigation BRIGHTNESS BRICONTRAST CONTRAST Only support VGA mode POSITION H position V position Only support VGA mode Auto Adjustment IMAGE Clock Phase White Balance USER 9300K COLOR 6500K ADC RIGHTNESS VR Brightness OPTION Volume...
Page 28
USER MANUAL CHAPTER 3 OPERATING THE DEVICE BRICONTRAST OSD Icon Sub-menu Settings Note BRIGHTNESS slider bar Default 50 Use to adjust the screen’s brightness. Range 0 to 100 CONTRAST slider bar Default 50 BRICONTRAST Use to adjust the screen’s contrast. Range 0 to 100 POSITION (VGA mode only) OSD Icon Sub-menu...
Page 29
USER MANUAL CHAPTER 3 OPERATING THE DEVICE GAMMA OSD Icon Sub-menu Settings Note Default GAMMA 0 Select and execute GAMMA0 Choose the parameter of GAMMA 0 as default setting. GAMMA 1 Select and execute GAMMA Choose the parameter of GAMMA 1 as default setting. GAMMA 2 Select and execute Choose the parameter of GAMMA 2 as default setting.
USER MANUAL CHAPTER 4 TROUBLESHOOTING TROUBLESHOOTING This chapter contains troubleshooting information. Check this guide before calling for repairs. - 30 -...
USER MANUAL CHAPTER 4 TROUBLESHOOTING CHAPTER 4: TROUBLESHOOTING This chapter contains troubleshooting information. Check this guide before calling for repairs. 4.1 Troubleshooting Guide If your monitor fails to operate correctly, check the following chart for possible solution before calling for repairs: Condition Check Point •...
USER MANUAL APPENDIX A FREQUENCY TABLE FREQUENCY TABLE This section includes supported frequency range of available video inputs. Appendix - 32 -...
Page 33
USER MANUAL APPEDIX A FREQUENCY TABLE APPENDIX A: FREQUENCY TABLE The choice of supported modes depends on the monitor native resolution. Refer to the table below for more information about available input signals. Vertical Signal name HDMI 1.4 HDMI 2.0 Frequency (Hz) ✔...
USER MANUAL APPENDIX B REMOTE CONTROL SET COMMAND Remote Control Set Command This section includes remote control set command. Appendix - 34 -...
Page 35
USER MANUAL APPEDIX B REMOTE CONTROL SET COMMAND APPENDIX B: REMOTE CONTROL SET COMMAND Function Length Command index Value Checksum(*1) 1 Power 0x05 0x40 0x00 0= ON/OFF 0xBB= ON/OFF 2 Auto 0x05 0x40 0x01 0=Auto 0xBA=Auto 3 Recall 0x05 0x40 0x02 0=Recall 0xB9=Recall 0xB8=White...
USER MANUAL APPENDIX C REMOTE CONTROL GET COMMAND Remote Control Get Command This section includes remote control get command. Appendix - 36 -...
Page 37
USER MANUAL APPEDIX C REMOTE CONTROL GET COMMAND APPENDIX C: REMOTE CONTROL GET COMMAND Command(Tx) Acknowledgement(Rx) Function Length Command index Checksum(*1) Length index Value Checksum(*1) 0=ON 0xFC=ON Power 0x04 0x30 0x00 0xCC 0x04 0x00 1=OFF 0xFB=OFF 0=VGA 0xF8=VGA Main Input Source 0x04 0x30 0x04 0xC8...