Set Up the Switch in Your Network and Power On the
Switch
Figure 5. Sample connections
Table 2. Figure components
Letter
Description
A
GS810EMX switch
B
Network router
C
Internet
D
Main gaming device
Red lines indicate 10G (or 5G or 2.5G) connections. Blue lines indicate 1G connections. A yellow line indicates
a direct Internet connection.
To set up the switch in your network and power on the switch:
1.
Connect LAN port 1 on the switch (A) to a LAN port on a router (B) that is connected to the Internet (C).
Port 1 and port 2 support 10G, 5G, and 2.5G speeds only if your router and Internet connection support
these speeds. Otherwise, these ports operate at 1G speed.
2.
On the switch, connect your devices as follows:
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
Install and Access the Switch in Your Network
Letter
Description
E
Main media streaming device
F
High-speed device such as another switch
G
Other network devices
12