Basic Technical Specifications - NETGEAR GS810EMX User Manual

Table 4. Factory default settings (Continued)
Feature
Power LED
LED color scheme
Other features
VLANs
Link aggregation
Power saving mode
Loop prevention
Port mirroring
Jumbo frames

Basic Technical Specifications

The following table shows the basic technical specifications of the switch.
For more specifications, see the data sheet that you can download by visiting downloadcenter.netgear.com.
Table 5. Basic technical specifications
Feature
Network interfaces
Network cable
Power adapter
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
Default Setting
Enabled
Standard color scheme. In the Standard Preset mode (which is the default mode),
the switch uses a color scheme with a purple and dark blue color palette. The Power
LED is orange.
No VLANs configured
VLANS configurable in access mode or trunk mode
No LAGs configured, LACP enabled
Disabled
Enabled
Disabled
Enabled (nonconfigurable)
Description
Two RJ-45 ports (ports 1 and 2) supporting 100BASE-TX, 1000BASE-T,
2.5GBASE-T, 5GBASE-T, or 10GBASE-T
Eight RJ-45 ports (ports 3 through 10), supporting 10BASE-T, 100BASE-TX, or
1000BASE-T
For 100 Mbps, use a Category 5 (Cat 5) or higher-rated cable.
For 1 Gbps, 2.5 Gbps, or 5 Gbps, use a Category 5e (Cat 5e) or higher-rated cable.
For 10 Gbps for up to 55 meters (180 feet), use a Category 6 (Cat 6) or higher-rated
cable.
For 10 Gbps for more than 55 meters (180 feet), use a Category 6A (Cat 6A) or
higher-rated cable.
Input: 100–240 VAC, 50–60 Hz (The plug is localized to the country of sale.)
Output: 12V, 2.5A
Factory Default Settings and Technical Specifications
83