Manage The Power Led - NETGEAR GS810EMX User Manual

Nighthawk Pro Gaming SX10 Switch Model GS810EMX
The HOME page displays.
4. In the SYSTEM INFO pane, select LED.
By default, the PORT ACTIVITY LEDS tab is selected and the ACTIVITY LEDs page displays.
5. At the bottom of the page, click the RESET TO DEFAULT link.
A pop-up warning window opens.
6. Click the CONTINUE button.
The pop-up window closes. The port LEDs are reset to default settings.

Manage the Power LED

The switch lets you manage the activity (enabled or disabled) and color of the Power LED on the top of the
switch.
To manage the Power LED:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. In the SYSTEM INFO pane, select LED.
By default, the PORT ACTIVITY LEDS tab is selected and the ACTIVITY LEDs page displays.
5. Click the POWER LED tab.
The POWER LED page displays.
6. Specify the following settings:
• Activity. By default, the Power LED lights when you apply power to the switch. To disable the Power
LED, click the Enable Power LED button.
When the LED activity is enabled, the button bar display green. When it is disabled, the button bar
displays white.
• Color. By default, the color of the Power LED is orange. To change the color, do the following:
a. Below Power LED Color, click the color icon.
b. Select one of the predefined colors. (The default color orange is among the predefined colors.)
Or, to create your own color, click the Other menu, and click a color in the color circle.
7. Click the SAVE button.
Your settings are saved.
Maintain and Monitor the Switch
72