View The Port Statistics - NETGEAR GS810EMX User Manual

When port mirroring is enabled, the button bar displays green. By default, port mirroring is disabled and
the button bar displays white.
After you enable port mirroring, you must specify the ports.
7. In the upper port section, select one or more source ports by clicking the port icons.
The icon for a selected port displays purple.
You cannot select a source port that is a member of a LAG.
8. In the lower port section, select the single destination port by clicking the port icon.
The icon for a selected port displays purple.
You cannot select a destination port that is a member of a LAG.
9. Click the APPLY button.
Your settings are saved.

View the Port Statistics

You can view port statistics for each of the 10 ports, including the bytes received, bytes sent, and cyclic
redundancy check (CRC) error packets, which are packets with errors or corrupt packets.
To view or clear the port statistics.
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select DIAGNOSTICS.
The CABLE TEST page displays.
5. From the menu on the left, select PORT STATISTICS.
The PORT STATISTICS page displays, showing the statistics for each of the ports.
6. To refresh the page with the latest information, click the REFRESH button.
7. To reset all counters to 0, click the CLEAR COUNTERS button.
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
Diagnostics and Troubleshooting
78