Manage Port Leds In A Batch - NETGEAR GS810EMX User Manual

Nighthawk Pro Gaming SX10 Switch Model GS810EMX
5. Click the number for the port LED that you want to manage.
The LED settings for the port display.
6. Specify the following settings:
• Activity. By default, the port LED lights when you connect a powered-on device to the port. To
disable the port LED, click the ACTIVITY LED button.
When the LED activity is enabled, the button bar display green. When it is disabled, the button bar
displays white.
• Frequency. By default, the frequency with which a port LED lights is high. To change the frequency,
select another setting from the Frequency menu.
• Color. The LED default color depends on the connection speed. For each connection speed, select
a predefined color or create your own color. To change the color for a port speed, do the following:
a. For port 1 or 2, click the 10G, 5G, 2.5G, or 1G icon. For ports 3 through 10, click the 1G or 100M
icon.
b. Select one of the predefined colors. Or, to create your own color, click the Other menu, and
click a color in the color circle.
• Brightness. By default, the LED brightness is high. To change the brightness, move the button on
the Brightness slider.
Your settings are saved automatically (that is, the page does not provide an APPLY button).

Manage Port LEDs in a Batch

The switch lets you manage the following settings for port LEDs (also referred to as Activity LEDs) in a
batch:
• Activity. By default, a port LED lights when you connect a powered-on device to the port. You can
disable the LED.
• Frequency. By default, the frequency with which a port LED lights is high. You can choose from four
other frequency settings.
• Color. The LED default color depends on the connection speed. For each connection speed, you can
select a predefined color or create your own color.
• Brightness. By default, the LED brightness is high. You can lower the brightness.
Note Because of different port speed capabilities, you can manage either the LEDs for
ports 1 and 2 in a batch or the LEDs for ports 3 through 10 in a batch.
To manage port LEDs in a batch:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
Maintain and Monitor the Switch
70