Change The Ip Address Of The Switch - NETGEAR GS810EMX User Manual

When the LAG is enabled, the button bar displays green.
8. Click the APPLY button.
Your settings are saved.

Change the IP Address of the Switch

By default, the switch receives an IP address from a DHCP server (or a router that functions as a DHCP
server) in your network.
To disable the DHCP client of the switch and change the IP address of the switch to a fixed
IP address:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. In the SYSTEM INFO pane, select DHCP.
The IP address fields display but you cannot change them yet. The button bar in the DHCP section
displays green because the DHCP client of the switch is enabled.
5. Click the button in the DHCP section.
The button bar displays white, indicating that the DHCP client of the switch is disabled, and you can
now change the IP address fields.
6. Enter the fixed (static) IP address that you want to assign to the switch and the associated subnet mask
and gateway IP address.
7. Click the APPLY button.
A pop-up window displays a message.
8. Click the X in the pop-up window.
Your settings are saved. Your switch web session might be disconnected when you change the IP
address.
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
Manage the Switch in Your Network
61