Reset The Port Leds To Default Settings - NETGEAR GS810EMX User Manual

Nighthawk Pro Gaming SX10 Switch Model GS810EMX
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. In the SYSTEM INFO pane, select LED.
By default, the PORT ACTIVITY LEDS tab is selected and the ACTIVITY LEDs page displays.
5. At the bottom of the page, click the BATCH EDIT link.
Check boxes for all ports display.
6. Select the check boxes for the port LEDs that you want to manage.
Either select the check boxes for port 1 and port 2 or select two, several, or all check boxes for other
ports (3 through 10).
7. Specify the following settings that will apply to all selected ports:
• Activity. By default, the port LED lights when you connect a powered-on device to the port. To
disable the port LED, click the ACTIVITY LED button.
When the LED activity is enabled, the button bar display green. When it is disabled, the button bar
displays white.
• Frequency. By default, the frequency with which a port LED lights is high. To change the frequency,
select another setting from the Frequency menu.
• Color. The LED default color depends on the connection speed. For ports 1 and 2, the page shows
four LED color sections (for 10G, 5G, 2.5G, and 1G speeds). For ports 3 through 10, the page shows
two LED color sections (for 10G and 100M speeds). For each connection speed, select a predefined
color, or create your own color by clicking the Other menu and then clicking a color in the color
circle.
• Brightness. By default, the LED brightness is high. To change the brightness, move the button on
the Brightness slider.
8. Click the SAVE button.
Your settings are saved.

Reset the Port LEDs to Default Settings

The switch lets you reset the port LEDs to default settings. The other settings on the switch are not affected.
The Power LED is not reset to default settings.
To reset the port LEDs to default settings:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
Maintain and Monitor the Switch
71