Table of Contents
Advertisement
The login page displays.
3.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select DIAGNOSTICS.
The CABLE TEST page displays.
5.
From the menu on the left, select LOOP PREVENTION.
The LOOP PREVENTION page displays.
6.
Disable or enable loop prevention by clicking the button.
When loop prevention is enabled (which is the default setting), the button bar displays green.
7.
Click the APPLY button.
Your settings are saved.
Enable Port Mirroring
Port mirroring lets you mirror the incoming (ingress) and outgoing (egress) traffic on a single source port to
a predefined destination port.You might need a network analyzer application to analyze the mirrored network
traffic.
Note
If you configure a port as a destination port for mirrored traffic, you might not be able
to use that port for regular traffic.
To enable port mirroring:
1.
Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2.
Enter the IP address that is assigned to the switch.
The login page displays.
3.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select DIAGNOSTICS.
The CABLE TEST page displays.
5.
From the menu on the left, select PORT MIRRORING.
The PORT MIRRORING page displays.
6.
Disable or enable port mirroring by clicking the button.
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
Diagnostics and Troubleshooting
77
- Quick Links:
- Change the Switch Password
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
