Delete A Custom Preset Mode; Manually Set The Quality Of Service Mode And Port Rate Limits - NETGEAR GS810EMX User Manual

5. Click the SAVE tab.
6. Select the Slot 1 or 2 button.
7. In the Preset Name field, enter a new name from 1 to 16 characters for the custom preset mode.
8. Click the RENAME button.
Your settings are saved.

Delete a Custom Preset Mode

You can delete a custom preset mode that you no longer need. You cannot delete the default Standard
Preset mode.
To delete a custom preset mode:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Select a custom preset mode.
The PREVIEW section shows the settings for the custom preset mode.
6. Click the DELETE button.
Your settings are saved. The custom preset mode is removed from the PRESET MODES page.
Manually Set the Quality of Service Mode and Port Rate
Limits
Instead of using preset performance modes, you can manually set the Quality of Service (QoS) modes to
manage traffic:
• Port-based QoS mode. Lets you set the priority to low with priority 0, low with priority 1, normal with
priority 2, normal with priority 3, medium with priority 4, medium with priority 5, high with priority 6, or
high with priority 7 for individual port numbers and lets you set rate limits for incoming and outgoing
traffic for individual ports. If broadcast filtering is enabled, you can also set the storm control rate for
incoming traffic for individual ports.
• 802.1P/DSCP QoS mode. Applies pass-through prioritization that is based on tagged packets and lets
you set rate limits for incoming and outgoing traffic for individual ports. If broadcast filtering is enabled,
you can also set the storm control rate for incoming traffic for individual ports.
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
Optimize the Switch Performance
30