Additional Preparations On X-Ray Units With Dimax Sensor - Planmeca ProMax User Manual

4 PREPARATIONS FOR EXPOSURE

4.2 Additional preparations on X-ray units with Dimax sensor

Attach Dimax sensor
to cephalostat
(refer to section 4.2.2)
4.2.1 Removing sensor from C-arm
8 Planmeca ProMax Cephalostat
If a Dimax sensor is attached to the C-arm, the sensor
must be moved to the cephalostat before you can take
cephalometric exposures.
NOTE
Do not remove the sensor during imaging process.
1. Push in the C-arm electrical connector. This will
disconnect the electrical connection between the
sensor and C-arm.
Remove Dimax sensor
from C-arm
(refer to section 4.2.1)
X-ray unit with
Dimax sensor
User's Manual