Chemical Resistance Of The Reader And Transponders; Readers - Siemens SIMATIC RF200 System Manual

4.3.6

Chemical resistance of the reader and transponders

4.3.6.1

Readers

Overview of the readers and their housing materials
The following sections describe the chemical resistance of the various transponders. The
chemical resistance depends on the housing materials used to manufacture the reader. The
following table provides an overview of the housing materials used for the readers RF210R,
RF220R, RF240R, RF250R, RF260R and RF280R:
Readers Individual parts of the
reader
RF210R, RF220R Sleeves
Fiber-optic cable
Cap (antenna)
RF240R, RF250R, Top shell and base
RF260R plate
Fiber-optic cable
Decorative foil
RF280R Top shell and base
plate
Fiber-optic cable
Decorative foil
Component irrelevant for resistance of the overall housing
1)
Note
If you have any questions, please contact Siemens Support, see section "Service & Support
(Page 377)".
SIMATIC RF200
System Manual, 07/2017, J31069-D0227-U001-A9-7619
Housing material of the reader
Brass (copper alloy)
CuZn40Pb2
Makrolon®2405
Thermocomp OF-1008-L-EM
Valox 357
Polyamide 6.6 GF30;
The chemical resistance of this plastic is listed in the section "Polyamide 6
and Polyamide 6.6 GF30 (Page 90)".
Makrolon®2405
Autotex V200
1)
Polyamide 12;
The chemical resistance of this plastic is listed in the section "Polyamide
12 (Page 91)".
Makrolon®2405
Autotex V200
1)
Planning the RF200 system
4.3 Installation guidelines
89