The following sections describe the impact on the operation of the RFID system when
mounted in the vicinity of metal.
4.3.2
Reduction of interference due to metal
Table 4- 18
Interference due to metal rack
Representation
SIMATIC RF200
System Manual, 07/2017, J31069-D0227-U001-A9-7619
Planning the RF200 system
4.3 Installation guidelines
Description
Problem:
A metal rack is located above the
transmission window of the reader.
This affects the entire field. In par-
ticular, the transmission window
between reader and transponder is
reduced.
Remedy:
The transmission window is no
longer affected if the transponder is
mounted differently.
51