Rf260R - Siemens SIMATIC RF200 System Manual

Transponder
MDS D522
Special variants
MDS D524
MDS D526
MDS D528
Mounting the transponder on or in metal is only possible with the appropriate spacer or if there is
1)
adequate clearance to the metal.
Values of > 100 % related to non metal surroundings can occur if transponders were developed
2)
specifically for mounting in/on metallic surroundings.
4.3.4.5

RF260R

The RF260R can be flush-mounted in metal. Please allow for a possible reduction in the field
data values. To avoid reduction, the distance a should be ≥ 20 mm.
Figure 4-13
SIMATIC RF200
System Manual, 07/2017, J31069-D0227-U001-A9-7619
Without metal
Flush-mounted in metal;
distance all round 0 mm
Without metal
1)
On metal, distance 15 mm
Flush-mounted in metal;
distance all round 25 mm
Without metal
1)
On metal, distance 25 mm
Flush-mounted in metal;
distance all round 25 mm
Without metal
On metal, distance 0 mm
Metal-free space for RF260R
Planning the RF200 system
4.3 Installation guidelines
RF250R with ANT 30
Antenna without Antenna flush-
metal mounted in metal
(all round 20 mm)
100
95
100
90
75
100
90
55
100
100
95
80
85
75
70
70
65
45
90
90
71