Simatic Rf290R; Features; Ordering Data Rf290R - Siemens SIMATIC RF200 System Manual

5.8

SIMATIC RF290R

5.8.1

Features

SIMATIC RF290R
Note
Reader requires external antennas
Note that the RF290R reader is designed only for operation with external antennas and can
only be operated in conjunction with the antennas ANT D5, D6 or D10.
Note
Note on operating the reader with ANT D6 / D10
When operating with a power ≥ 3 W, the limits are adhered to according to 2004/40/EC
(minimum requirements concerning the protection of workers). Note that the antennas may
only be used in an "industrial environment" and not in buildings used by the public.
5.8.2

Ordering data RF290R

Table 5- 15
RF290R
with RS-232 interface for PC mode and RS-422 interface for CM mode
SIMATIC RF200
System Manual, 07/2017, J31069-D0227-U001-A9-7619
Characteristics
Design
Application
Ordering data RF290R
①
RS-422/RS-232 interface, 24 V power supply
②
Digital I/O
③
External antenna
④
Operating display, 4 LEDs:
Power (PWR)
•
Active (ACT)
•
Present (PRE)
•
Error (ERR)
•
Identification tasks in production control and in
intra-logistics, e.g. skid identification, container
management, HF gates (F&B)
When connected via a PC multitag operation is
possible.
Readers
5.8 SIMATIC RF290R
Article number
6GT2821-0AC12
147