Dsc Set Mode - Furuno FM-3000 Operator's Manual

5.DSC Operation

5.9 DSC Set Mode

5.9.1 Add Address ID
5.9.2 Delete Address ID
5.9.3 Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [ DSC/ENT ] to enter the DSC menu.
w Rotate [ CHANNEL ] to select "
[ DSC/ENT ].
e Rotate [ CHANNEL ] to select "
[ DSC/ENT ].
33
(See p.13 for detail)
(See p.14 for detail)
," push
," push
r Set the offset time from the UTC (Universal Time Coordi-
nated) time.
• Edit the digit of offset time by using [ CHANNEL ].
- Push [ CH/WX ] or [ SCAN ] for cursor movement.
- Push [ DSC/ENT ] to set the offset time.
• Rotate [ CHANNEL ] to edit or delete " ," when the cursor is on
the first digit.
No offset time (default)
t Push [ DSC/ENT ] to program and to exit the DSC menu.
Note:
The local time indication is not available when a GPS
receiver (sentence formatter 'RMC') is input, the transceiver's
display indicates UTC time only.
–12 hours