Mounting Using Optional Mounting Bar - Nortec EL005 Installation Manual

5.4.3

Mounting Using Optional Mounting Bar

Locate the Nortec EL humidifier according to
mounting surface as follows using the optional mounting bar. Mounting bars are a factory-installed option.
If ordered, the corresponding bars and bumpers will be riveted/installed to the housing at the factory.
1. Locate 2×4 wooden studs or equivalent support in the mounting surface, and mark the attachment
points "A" at the desired position with the help of a level. For small or medium housing refer to
For large housing refer to
A
Figure 9:
1 Mounting bar
2 Flat washer (×3)
3 Lag bolt, 1/4×2 in (×3)
4 Screw, M6×10 (×1), supplied
Installation
20
Figure 10 on page
1
A
A
Optional Mounting, Small or Medium Housing
"Location and Clearances" on page
21.
2
3
2582302_C_EN_1611
16, and install it on the
Housing Size
Dimension
Small
X 6.0 in
(152 mm)
4
Figure 9.
Medium
8.0 in
(203 mm)
Nortec EL