Nortec EL005 Installation Manual page 25

El series, electrode steam humidifier
Table of Contents

Advertisement

A
Figure 10:
Optional Mounting, Large Housing
1
Mounting bar
2
Flat washer (×3)
3
Lag bolt, 1/4×2 in (×3)
4
Screw, M6×10 (×1), supplied
2. Align the holes in the mounting bar with the marks for the attachment points "A", and install the
mounting bar on the mounting surface with 1/4×2 in lag bolts and flat washers (supplied by others).
Use longer bolts if going through drywall or other structural material into the mounting surface. Level
the mounting bar before tightening the lag bolts.
3. Remove the door panels from the humidifier.
WARNING!
Heavy object – risk of injury!
The small humidifier weighs 45 lb (20 kg), and the large humidifier weights 120 lb (54 kg).
Prevention: Use an appropriate lifting device, or request assistance to raise the humidifier into
position.
4. Carefully raise the humidifier into position, and hang it on the mounting bar.
5. Secure the humidifier to the mounting bar with the M6×10 screw (supplied), and fasten securely.
6. Reinstall the door panels, and fasten them securely.
Nortec EL
A
A
2582302_C_EN_1611
1
2
3
Housing Size
Dimension
Large
X
16.0 in
(406 mm)
4
Installation
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

El020El030El050El075El100El150 ... Show all

Table of Contents