Top Tether Anchorages - Subaru FORESTER Manual

tether, latch the hook onto the top tether
anchorage and tighten the top tether.
Refer to the "Top tether anchorages"
section for additional instructions.
For further information, refer to the in-
struction manual supplied by the child
restraint system manufacturer.
CAUTION
When you install a child restraint
system, follow the manufacturer's
instructions supplied with it. After
installing the child restraint system,
check to ensure that it is held
securely in position. If it is not held
tight and secure, the danger of your
child suffering personal injury in the
event of an accident may be in-
creased.
NOTE
Before installing a child restraint sys-
tem, ask the manufacturer of the sys-
tem to confirm that it is one approved
for your vehicle.
& Top tether anchorages
Your vehicle is provided with two top
tether anchorages so that a child restraint
system having a top tether can be
installed in the rear seat. When installing
a child restraint system using top tether,
proceed as follows, while observing the
instructions by the child restraint system
manufacturer.
Since a top tether can provide additional
stability by offering another connection
between a child restraint system and the
vehicle, we recommend that you use a top
tether whenever one is required or avail-
able.
Seat, seatbelt and SRS airbags
! Anchorage location
1) For left seat
2) For right seat
There are two anchorages for each seat-
ing position on the rear wall of the cargo
area.
– CONTINUED –
1-35