Power Steering; L Models - Subaru FORESTER Manual

4. Insert the screwdriver into the hole.
5. Push down on the screwdriver and
move the selector lever from the "P" to the
"N" position.
6. Remove the screwdriver from the hole.
Depress the brake pedal and start the
engine.
We recommend that you take your vehicle
to the nearest SUBARU dealer immedi-
ately to have the system repaired.

Power steering

& 2.0 L models
Power steering warning light
2.0 L models are equipped with an electric
power steering system. When the ignition
switch is turned to the "ON" position, the
power steering warning light on the
combination meter illuminates to inform
the driver that the warning system is
functioning properly. Then, if the engine
started, the warning light turns off to inform
the driver that the steering power assist is
operational.
CAUTION
When the power steering warning
light is illuminated, there may be
Starting and operating
more resistance when the steering
wheel is operated. We recommend
that you drive carefully to the near-
est SUBARU dealer and have the
vehicle inspected immediately.
NOTE
If the steering wheel is operated fre-
quently while the vehicle is stopped,
the power steering control system may
temporarily limit the power assist in
order to prevent the system from over-
heating. At this time, there will be more
resistance to steering. However this is
not a malfunction. The normal steering
force will be restored after a short time.
& 2.5 L models
2.5 L models are equipped with a hydrau-
lic power steering system. The power
steering system operates only when the
engine is running.
If you lose power steering assist because
the engine stops or the system fails to
function, you can steer but it will take
much more effort.
NOTE
Right after the engine has been started
and before it has warmed up, you may
hear a noise coming from areas adja-
– CONTINUED –
7-25