Scan; Display Selection - Subaru FORESTER Manual

NOTE
. The "F-RDM" indication refers to the
random playback in the folder. It ran-
domly repeats all of the tracks in the
folder. It is possible to select the
function when an MP3/WMA format
track is playing.
. The "D-RDM" indication refers to the
random playback of a disc. It randomly
repeats all of the tracks on the CD. It is
possible to select the function when an
MP3/WMA format track is playing.
To cancel the random playback mode,
press the "RPT" button again for more
than 0.5 second.
The "RDM" indication will turn off, and the
normal playback mode will be resumed.
NOTE
Random playback will be cancelled if
you perform any of the following steps:
. Press the "RPT" button and select
CANCEL
. Press the " " button
. Press the disc select button
. Press the "SCAN" button
. Press the "LOAD" button when
there is free space in the CD magazine.
& Scan
The scan mode lets you listen to the first
10 seconds of each track/file in succes-
sion. Press the "SCAN" button to start
scanning upward beginning with the track/
file(s) following the currently selected one.
After all track/file(s) in the disk/folder have
been scanned, normal playback will be
resumed. To cancel the scan mode, press
the "SCAN" button again.
NOTE
The scan mode will be cancelled if you
perform any of the following steps:
. Press the "RPT" button
. Press the " " or " " side of the
TUNE/TRACK button
. Turn the "TRACK" dial
. Press the " " or " " side of the
Audio
SEEK/SCAN button
. Press the " " button
. Press the disc select button
. Select the radio or AUX mode
. Press the "LOAD" button when
there is free space in the CD magazine.
. Turn off the power of the audio
equipment.
. Turn the ignition switch to the
"LOCK" position.
& Display selection
If you press the "DISP" button during
playback, the indication will change to
the next one in the following sequence.
– CONTINUED –
5-19