Precautions When Jump Starting; How To Jump Start - Subaru FORESTER Manual

9-8
In case of emergency
gen gas. To prevent an explosion,
charge your vehicle's battery in a
well ventilated area and keep flames
away.
& Precautions when jump
starting!
WARNING
. Never attempt jump starting if the
discharged battery is frozen. It
could cause the battery to burst
or explode.
. Be sure the jumper cables and
clamps on them do not have
loose or missing insulation.
Do not jump start unless cables
in suitable condition are avail-
able.
. A running engine can be danger-
ous. Keep your fingers, hands,
clothing, hair and tools away
from the cooling fan, belts and
any other moving engine parts.
Removing rings, watches and
ties is advisable.
. Jump starting is dangerous if it
done incorrectly. If you are un-
sure about the proper procedure
for jump starting, consult a com-
petent mechanic.
CAUTION
The battery used for boosting must
be 12 V. Do not jump start unless
you are sure that the booster battery
is correct.
When your vehicle does not start due to a
run down (discharged) battery, the vehicle
may be jump started by connecting your
battery to another battery (called the
booster battery) with jumper cables.
& How to jump start
1. Make sure the booster battery is 12
volts and the negative terminal is
grounded.
2. If the booster battery is in another
vehicle, do not let the two vehicles touch.
3. Turn off all unnecessary lights and
accessories.
4. Connect the jumper cables exactly in
the sequence illustrated.