Poor Quality Image - Basler A102K User Manual

Troubleshooting

6.2.2 Poor Quality Image

Use this chart if the image is poor quality, is completely white, or is completely black. If you get no
image at all when you attempt to capture an image with the frame grabber, use the chart that
appears in Section 6.2.1.
Use the CCT+ to set the camera for test image one. Use your frame grabber to capture
an image and examine the image carefully. (Most frame grabbers include software
tools that allow you to see the individual values of each pixel in the image and
histograms that display distributions of the pixel values in the image.)
The pixel values in your captured test image should be exactly as described in Section
3.10. Also, if you capture several test images, the pixel values should be the same in
Use the CCT+ to copy the Factory Set to the Work Set.
Take the camera out of test image mode and capture a
Images are too
bright or too dark.
Do the following:
Make sure that the lens cap has
been removed.
Check the lens aperture. If the
images are too dark, try opening the
aperture. Try closing the aperture if
they are too bright.
Check the exposure time. If the
images are too dark try increasing
the exposure. Try decreasing the
exposure if they are too bright.
Check your light source. If the
images are too dark, try increasing
your light intensity. Try decreasing
the intensity if they are too bright.
Check your gain setting. If the
images are too dark, try increasing
the gain. Try decreasing the gain if
they are too bright.
Has the problem been corrected?
Yes
Exit this chart.
Contact Basler Technical Support. The contact numbers appear on the title page of this manual.
Before you call for support, be sure to make note of the camera settings and the frame grabber settings you are
using. You should also have a captured live image and a captured test image available. Technical support will
6-4
DRAFT
all of the captured test images.
Are the test images OK?
Yes
normal image.
Is the problem still present?
Yes
Do the following:
Make sure that you are using a DC light
source. Using an AC light source can
make images appear noisy.
Make sure that the camera has proper
ventilation. If the camera becomes
extremely hot, it may produce noisy
images.
Check the exposure time. If you use an
extremely long exposure time, the
images can become noisy.
Check your gain setting. Using a very
low or a very high gain setting can
cause noisy images.
Examine the objects that you are
imaging. Objects with characteristics
such as changing surface texture or
reflectance will produce images that
appear noisy.
Has the problem been corrected?
No
Exit this chart.
frequently request that you e-mail copies of these captured images.
One of the camera's settings was
significantly misadjusted. Review the
No
camera manual to make sure that you
Images look noisy.
Yes
No
Go to the interfacing
No
troubleshooting chart.
are setting the camera correctly.
Other image
problems.
BASLER A102
k