4.2.4.2 Exposure Time Control Mode
Purpose:
Type:
Read Command:
Response:
Write Command:
Response:
Data Format:
k
BASLER A102
To set the exposure time control mode or to read the current exposure time control mode
setting. See Section 3.2 for an explanation of exposure time control modes.
This is a read or write command.
Cmd-ID
0xA0
Cmd-ID
0xA0
Cmd-ID
0xA0
None
Byte 1
ID
Exposure Time Control Mode
0x00
Free-run, Programmable
0x04
ExSync, Level-controlled
0x05
ExSync, Programmable
DRAFT
R/W-Flag
Data Length
1
R/W-Flag
Data Length
0
R/W-Flag
Data Length
0
An ID that specifies the exposure mode
(see the table below).
Configuring the Camera
Data
1
-
Data
1
1 Byte
Data
1
1 Byte
4-11