Removing The Ignition (Sem); Removing The Ignition (Kokusan 4K-3) - KTM 400-660 LC4 1998-2005 Repair Manual

4-5E

Removing the ignition (SEM)

– Undo the 4 bolts and remove ignition cover and O-ring.
– Use the crankshaft locking bolt 580.30.080.000 to block the
crankshaft.
– Unscrew collar nut (LH thread) and remove spring disc.
– Fit extractor 580.12.009.000 and pull off flywheel. Use protective
sleeve 510.12.016.000.
– Remove woodruff key from the crankshaft.
– Twist the crankshaft locking bolt out until the crankshaft is no longer
blocked.
!
N
EVER USE A HAMMER OR ANY OTHER TOOL ON THE FLYWHEEL TO AVOID
.
LOOSENING OF THE MAGNETS

Removing the ignition (Kokusan 4K-3)

– Undo the 4 bolts and take off the ignition cover together with the
O-ring.
– Use the crankshaft locking bolt 580.30.080.000 to block the
crankshaft.
– Undo the collar nut (LH thread) and remove the spring washer.
– Mount the extractor 584.29.009.000 and pull off the flywheel.
– Take the woodruff key out of the crankshaft.
– Finally, twist out the crankshaft locking bolt until the crankshaft is no
longer blocked.
!
N
EVER USE A HAMMER OR SIMILAR TOOL ON THE FLYWHEEL TO PREVENT
.
LOOSENING OF THE MAGNETS
CAUTION
CAUTION
!
!