Assembling The Carburetor Keihin Fcr-Mx 41 - KTM 400-660 LC4 1998-2005 Repair Manual

8-44E
1
5
6
8
9
11

Assembling the carburetor Keihin FCR-MX 41

3
– Mount the idle-air jet
– Place the O-ring
the carburetor by means of the 2 screws.
2
– Insert the fuel port in the carburetor and fix with screw
NOTE: In the mounted state, the connection piece must be easy to
turn.
4
– Mount the choke slide
times, checking for smooth operation. Also make sure the choke and
the hot start knob lock into place.
– Thread the spring, the washer and the O-ring onto the mixture
control screw
will go.
7
– Now, unscrew the mixture control screw the number of turns written
down during disassembly.
NOTE: See the Technical Specifications for the basic carburetor setting.
10
– Mount idling jet
jet
– Insert the needle valve seat
12
1
and the main air jet
3
in the groove and secure the intake trumpet to
5
, the hot start knob
7
and screw the mixture control screw in as far as it
8
, starting jet
bk
.
bl
2
.
4
.
6
and actuate several
9
and needle jet together with main
in the bore and fix with screw
bm
.