Mounting The Oil Hoses; Mounting The Clutch Release Lever; Mounting The Electric Starter Motor; Mounting The Water Hoses - KTM 400-660 LC4 1998-2005 Repair Manual

6-20E

Mounting the oil hoses

1
– Mount the two oil hoses.
1 2
– Tighten banjo bolt with 10 Nm and banjo bolt with 15 Nm.
2

Mounting the clutch release lever

– To mount the clutch release lever 3 , turn the clutch release shaft
clockwise as far as stop and fit the release lever as illustrated.
4
– Tighten clamp bolt .
3
4

Mounting the electric starter motor

5
– Slightly oil the O-ring on the flange of the electric starter motor.
5
– Mount the electric starter motor and fix it with 2 bolts .

Mounting the water hoses

– Mount the two water hoses and use the four hose clamps to fasten.