Removing The Engine - KTM 400-660 LC4 1998-2005 Repair Manual

2
3
5
8
7

Removing the engine

– Thoroughly clean the entire motorcycle.
– When working on a motorcycle with engine guard, remove the
latter.
– Jack the motorcycle up on a stable supporting device.
– Remove the seat, the side covers as well as the tank and the spoilers.
– Disconnect the negative pole of the battery.
– Undo the 2 hose clamps
carburetor backwards out of the intake flange and swing it aside.
1
– Unhook the 4 springs
– Undo bolt
4
– Undo bolt
– Disconnect water hoses
the cooling liquid.
– Remove the two bolts
6
– Unhook the clutch cable and the decompression cable.
– Disconnect the bleeder hose at the valve cover.
1
as well as hose clamp
3
at the exhaust manifold.
4
.
5
and remove the exhaust manifold.
6 and 7 from the water pump and let out
8
, disconnect and remove the fan.
3-2E
2
. Pull the