Product Safety Requirements Rbs 2000 - Ericsson CME 20 R6.1 Reference Manual

42

Product Safety Requirements RBS 2000

This chapter specifies the product safety requirements for RBS 2000.
42.1 References
IEC 215
EN 60950
IEC 950
CAN/CSA-C22.2
CAN/CSA-C22.2
UL 1419
73/23/EEC
UL 1950 3rd edition
IEC 529
42.2 Product Safety
This section defines the Electrical, Mechanical, Heat and Fire Safety
Requirements for the Radio Base Station. The RBS is designed to fulfil
the following International Standards:
73/23/EEC Low Voltage Directive. (To achieve this, the RBS conforms
to the standards below).
EN 60 950 "Safety of Information Technology Equipment Including
Electrical Business Equipment".
This means that we comply with the general IEC 950 including national
differences notified in EN 60 950.
IEC 215 Safety requirements for transmitting equipment.
The product shall be listed by National Recognized Testing Laboratory
(NRTL).
For the US the following standards are applicable:
UL 1950 3rd edition "Safety of Information Technology Equipment
Including Electrical Business Equipment".
UL 1419 Standard for Professional Audio and Video Equipment.
EN/LZT 123 2697 R5A
1998-08-13
Product Safety Requirements RBS 2000
Safety requirements for radio transmitting
equipment.
Safety of Information Technology Equipment.
Including Electrical Business Equipment.
Safety of Information Technology Equipment.
Including Electrical Business Equipment.
No 1-M94
Audio, Video and Similar Electronic Equipment.
No 950-95
Safety of Information Technology Equipment
Including Electrical Business Equipment.
Standard for Professional Video and Audio
Equipment.
Low Voltage Directive.
Safety of Information Technology Equipment
Including Electrical Business Equipment.
Classification of degrees of protection provided by
enclosures. (IP Code).
© Ericsson Radio Systems AB
— All Rights Reserved —
285 (306)