Product Requirements - Ericsson CME 20 R6.1 Reference Manual

Product Specification for RBS 2301
4.6.4 Operator Interface
When opening the Mounting Base there is an MMI area available
containing the operational interface which includes the LED's and
buttons listed below.
Indicators (LEDs)
Fault
Operational
Local mode
Reduced capacity
Test TRX1
Test TRX2
AC Power on
Battery fault
External alarm
Buttons
CPU reset
Local/remote mode
Test Operation initiation
Switches
Battery
AC Mains
Barcodes Signs
The bar code sign for product identification is readable without
disturbing the RBS function.
4.7

Product Requirements

4.7.1 Appearance
Ericsson products are designed to appear as one physical unit,
inconspicuous, pleasant and good-looking. The standard colour of the
RBS is Grey.
The front cover of the RBS which is designed as a sun-shield may be
ordered in different colours to make the RBS even more inconspicuous.
There is an optional integrated antenna system which will support the
idea that the RBS and antenna site are the same.
46 (306)
One or more faults, equals BS fault.
At least one TRX operational.
RBS in local mode.
One of two TRX's operational.
Result from TRX1 test operation.
Result from TRX2 test operation.
AC Power is switched on to RBS.
Lowbattery DC voltage, battery absent.
One or more external alarm active.
© Ericsson Radio Systems AB
— All Rights Reserved —
EN/LZT 123 2697 R5A
1998-08-13