Concepts - Ericsson CME 20 R6.1 Reference Manual

EMC Capabilities for RBS 2302
40.2

Concepts

External signal Port
Telecommunication Port
Enclosure Port
Performance Criteria A
Performance Criteria B
Performance Criteria C
Performance Criteria CT
Performance Criteria TT
Performance Criteria CR
Performance Criteria TR
Performance Criteria CRptr Continuous phenomena applied to
266 (306)
Cable or lead intended for connection to
units located outside the Radio Base
System without connection to a public
network.
Cable or lead intended for connection to a
public network.
The physical boundary of the test unit
through which electromagnetic fields may
radiate or impinge.
The unit shall continue to operate as
intended. During the test, no degradation
of performance or loss of function is
allowed below the specified test level.
The system shall continue to operate as
intended after the test. During the test,
degradation of performance is however
allowed below the specified test level. No
change of actual operating state or stored
data is allowed.
Temporary loss of function is allowed,
provided the function is self-recoverable
or can be restored by the operation of the
controls.
Continuous phenomena applied to
Transmitters. A communication link is
established at the start of the test and
maintained during the test.
Transient phenomena applied to
Transmitters. A communication link must
be established at the start of the test and
maintained during and after injection of
the transients.
Continuous phenomena applied to
Receivers. A communication link must be
established at the start of the test and
maintained during the test.
Transient phenomena applied to Receivers.
A communication link must be established
at the start of the test and maintained
during and after injection of the transients.
Ancillary RF amplifiers. The gain
measured during the test must not change
from the gain measured before the test by
more than 1 dB. During the test no
© Ericsson Radio Systems AB
— All Rights Reserved —
EN/LZT 123 2697 R5A
1998-08-13