Operational Conditions - Ericsson CME 20 R6.1 Reference Manual

25.2.3 Functions Involving RBS Database
The RBS database provides a number of functions to access the
database, as follows:
•
•
•
•
25.3

Operational Conditions

25.3.1 Operation and Maintenance
Maintenance functions related to Installation Data Handling are
described in chapter Operation and Maintenance Terminal.
25.3.2 Capabilities
•
•
EN/LZT 123 2697 R5A
1998-08-13
Read/Install RBS Database:
−
The entire RBS database can be read or written. This
function is used to transfer the RBS database between the
OMT and the RBS.
Read Hardware Information:
−
This function allows the BSC to read details of the
hardware installed in the RBS, specifically:
−
Product number
−
Revision
−
Serial number
−
Placement information
Read one Information Element:
−
This function allows the BTS to read different
information elements in the RBS and RU databases.
Update one Information Element:
−
This function allows the BTS to write information
elements in the RBS and RU databases.
Read of the entire RBS database (from the RBS to the OMT)
takes less than 4 minutes.
Installation of the entire RBS database (copy from the OMT to
the RBS) takes less than 4 minutes.
© Ericsson Radio Systems AB
— All Rights Reserved —
Installation Data Handling
161 (306)