Configurations - Ericsson CME 20 R6.1 Reference Manual

LVF
PSU
Climate Equipment
Battery
Connection Unit
Distribution Plane
5.4 Configurations
5.4.1 Options
Options are configurations that require additional hardware.
Appearance
The following optional colours are available for the front sun-shield
besides the standard colour.
NCS S2010-B70G
NCS S1020-R70B
NCS S1020-Y90R
NCS S1020-Y50R
NCS S1020-Y10R
According to NCS standard.
EN/LZT 123 2697 R5A
1998-08-13
Product Specification for RBS 2302
The FU (1 per RBS) is the interface
between the transmitters, receivers and the
antenna system.
Low Voltage Filter
The LVF contains components for voltage
filtering.
Power Supply Unit
The PSU (1 per RBS), which rectifies the
incoming AC mains to regulated DC
voltages, controls and supervises the
battery and supervises the temperatures
inside the cabinet.
Heater to heat the RBS at a low
temperature.
The battery is an internal entity and is
replaceable without disturbing traffic
handling.
The connection unit contains components
for lightning and EMC protection. It also
includes fuses, AC mains and battery
switch as well as plinths for the external
interfaces except for antenna feeders.
The distribution plane interfaces the DXB,
the TCB, the TXUs, the RXUs and the
PSU. It also contains the buttons and
indicators for the RBS.
(Olive green)
(Sky blue)
(Brick red)
(Brown)
(Yellow)
© Ericsson Radio Systems AB
— All Rights Reserved —
59 (306)