Operational Conditions - Ericsson CME 20 R6.1 Reference Manual

After this, a new average value is calculated after each new
measurement, that is a sliding window principle is used where the
oldest value within the averaging period is replaced by the new one.
The average value is classified into one of five Interference Level Bands.
Results from idle channel measurements are reported via the Abis
message RF_RESOURCE_INDICATION /GSM 08.58:8.6.1/. This is
done when the first value has been calculated and thereafter when the
calculated average value is classified into a new Interference Level
Band.
10.4

Operational Conditions

The measurements of R.M.S. signal levels fulfil the requirements in /
GSM:05.08:8.1.2/. When applicable, exceptions are stated within the
context of Radio Reception.
The measurements of RXQUAL fulfil the requirements in /GSM
05.08:8.2/, that is for BER from < 0.2% to > 12.8%.
The MEASUREMENT_RESULT message and the
RF_RESOURCE_INDICATION message are sent during the following
reporting period.
EN/LZT 123 2697 R5A
1998-08-13
© Ericsson Radio Systems AB
— All Rights Reserved —
Channel Measurements
103 (306)