Radio Reception - Ericsson CME 20 R6.1 Reference Manual

19

Radio Reception

Radio reception denotes the function to "Receive a Radio Frequency
(RF) signal".
19.1 References
For GSM 900 and GSM 1800:
/GSM:03.03/
/GSM:05.02/
/GSM:05.04/
/GSM:05.05/
/GSM:05.08/
/GSM:05.10/
For GSM 1900:
The references PCS:1-8 are chapters in the document: Volume 1, PCS
1900 Physical Layer 1 Specification marked: JTC(AIR)94.08.01-231R3
/PCS:1/
/PCS:2/
/PCS:3/
/PCS:4/
/PCS:5/
/PCS:6/
/PCS:7/
/PCS:8/
When a reference is given in the text, it may have a section number
added. As example /PCS:5.3.5/ points at chapter 5, section 3.5.
19.2 Concepts
Base Transceiver Station (BTS), unit operating on a set of radio
frequencies in one cell.
Radio Base Station (RBS), all equipment forming an Ericsson base
station; may comprise several BTSs.
The RX reference point X is defined as the point where the RX antenna
signal crosses the RBS border, i.e. the connector for the antenna feeder.
EN/LZT 123 2697 R5A
1998-08-13
GSM Requirements 03.03 Phase 2
GSM Requirements 05.02 Phase 2
GSM Requirements 05.04 Phase 2
GSM Requirements 05.05 Phase 2
GSM Requirements 05.08 Phase 2
GSM Requirements 05.10 Phase 2
Physical Layer Overview
Multiplexing and Multiple Access on the
Radio Path
Forward Error Protection Coding and
Interleaving
Modulation
Radio Transmission and Reception
Radio Subsystem Link Control
Synchronization
Change History
© Ericsson Radio Systems AB
— All Rights Reserved —
Radio Reception
131 (306)