Check Blue Cable Power Supply; Check Continuity Of Brown Cable - Malaguti MADISON 3 125 cc Workshop Manual

B
CHAPTER

8.3 Check blue cable power supply

- Connect Tester (20 V DC), as follows:
- Terminal (+) of tester
- Tester (-) of terminal
- Turn key "ON"
- Power measured must be 12 V
- Not compliant: blue cable is interrupted.
- Repair. See "Wiring Diagram".
F. 55

8.4 Check continuity of brown cable

- Connector Tester ( ) between electric starter and electronic control unit, as follows:
- Terminal (+) of tester
- Terminal (-) of tester
- No continuity: brown cable interrupted
- Repair. See "Wiring Diagram".
F. 56
NOTE: if tests are all positive, replace electronic control unit.
38
PAGE
Signalling System
Blue cable.
chassis grounding.
+12 V WITH KEY ON
4 5 6 7 8
3
Brown cable (starter) (1).
Brown cable (control unit - PIN 7) (2).
+12 V WITH KEY ON
BL
M
4 5 6 7 8
3
2
BL
M
1
MADISON 125 cc
08.06
ISSUE