Connectors; Floppy Disk Drive Connector:fdd1; Hard Disk Connector:ide1&Ide2; Connectors ................................................................................. Connectors Connectors Connectors Connectors - VIA Technologies P4M266A User Manual

Hide thumbs Also See for P4M266A:

Table of Contents

The mainboard provides connectors to connect to FDD, IDE HDD, USB

Ports, CPU/System FAN, etc.

The mainboard provides a standard floppy disk drive connector that

supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Hard Disk Connectors:IDE1&IDE2

The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100

/133 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 33/66

/100/133 function. You can connect up to four hard disk drives, CD-ROM, 120MB

Floppy (reserved for future BIOS) and other devices.

IDE1 (Primary IDE Connector)

The first hard drive should always be connected to IDE1.IDE1 can connect

a Master and a Slave drive.You must configure second hard drive to Slave

mode by setting the jumper accordingly.

IDE2 (Secondary IDE Connector)

IDE2 can also connect a Master and a Slave drive.

FDD1

Technical Reference Booklet

This Manual: http://www.manuallib.com/file/2414879

Connectors

Table of Contents

P4x266e