Verifying The Pre-Provisioned Configuration - Cisco Nexus 5000 Series Configuration Manual

Verifying the Pre-Provisioned Configuration

This example shows how to remove a preprovisioned module from a chassis slot:
switch(config)# slot 2
switch(config-slot)# no provision model N5K-M1404
switch(config-slot)#
Verifying the Pre-Provisioned Configuration
To display the pre-provisioned configuration, perform one of the following tasks:
Command
show provision
show module
show switch-profile
show running-config
exclude-provision
show provision failed-config
show provision failed-config interface
show running-config
show startup-config
Configuration Examples for Pre-Provisioning
The following example shows how to enable pre-provisioning on slot 110 on the Cisco Nexus 2232P Fabric
Extender and how to pre-provision interface configuration commands on the Ethernet 110/1/1 interface.
switch# configure terminal
switch(config)# slot 110
switch(config-slot)# provision model N2K-C2232P
switch(config-slot)# exit
switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# interface Ethernet110/1/1
switch(config-if)# description module is preprovisioned
switch(config-if)# show running-config interface Ethernet110/1/1
Time: Wed Aug 25 21:29:44 2010
version 5.0(2)N1(1)
interface Ethernet110/1/1
description module is preprovisioned
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
38
Purpose
Displays provisioned modules.
Displays module information.
Displays switch profile information.
Displays the running configuration without the pre-provisioned
interfaces or modules that are offline.
Displays the pre-provisioned commands that were not applied to the
configuration when the interface or module came online.
This command also displays a history of failed commands.
Displays the commands that were not applied when the interface or
module came online.
Displays the running configuration including the pre-provisioned
configuration.
Displays the startup configuration including the pre-provisioned
configuration.
Configuring Module Pre-Provisioning