Configuring Contact Information - Cisco Nexus 5000 Series Configuration Manual

Configuring Contact Information

Step 2 Under Getting Started, follow the directions to register Smart Call Home.
What to Do Next
Configure contact information.
Configuring Contact Information
You must configure the e-mail, phone, and street address information for Smart Call Home. You can optionally
configure the contract ID, customer ID, site ID, and switch priority information.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
120
Command or Action
switch# configure terminal
switch(config)# snmp-server
contact sys-contact
switch(config)# callhome
switch(config-callhome)#
email-contact email-address
switch(config-callhome)#
phone-contact
international-phone-number
switch(config-callhome)#
streetaddress address
switch(config-callhome)#
contract-id contract-number
Purpose
Enters global configuration mode.
Configures the SNMP sysContact.
Enters Smart Call Home configuration mode.
Configures the e-mail address for the primary person
responsible for the switch.
The email-address can be up to 255 alphanumeric characters
in e-mail address format.
You can use any valid e-mail address. The address
Note
cannot contain spaces.
Configures the phone number in international phone number
format for the primary person responsible for the device.
The international-phone-number can be up to 17
alphanumeric characters and must be in international phone
number format.
Note The phone number cannot contain spaces. Use the
plus (+) prefix before the number.
Configures the street address for the primary person
responsible for the switch.
The address can be up to 255 alphanumeric characters.
Spaces are accepted.
(Optional)
Configures the contract number for this switch from the
service agreement.
The contract-number can be up to 255 alphanumeric
characters.
Configuring Smart Call Home