Implementing A Rollback - Cisco Nexus 5000 Series Configuration Manual

Configuring Rollback

Implementing a Rollback

You can implement a rollback to a checkpoint name or file. Before you implement a rollback, you can view
the differences between source and destination checkpoints that reference current or saved configurations.
Note If you make a configuration change during an atomic rollback, the rollback will fail.
Procedure
Step 1
Step 2
This example shows how to create a checkpoint file and then implements an atomic rollback to a user checkpoint
name:
switch# checkpoint stable
switch# rollback running-config checkpoint stable atomic
Verifying the Rollback Configuration
To display the rollback configuration, perform one of the following tasks:
Command or Action
Example:
switch# show checkpoint stable
Command or Action
show diff rollback-patch {checkpoint src-cp-name |
running-config | startup-config | file source-file}
{checkpoint dest-cp-name | running-config |
startup-config | file dest-file}
Example:
switch# show diff rollback-patch checkpoint
stable
running-config
rollback running-config {checkpoint cp-name | file
cp-file} atomic
Example:
switch# rollback running-config checkpoint stable
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
Purpose
Purpose
Displays the differences between the
source and destination checkpoint
selections.
Creates an atomic rollback to the
specified checkpoint name or file if no
errors occur.
Implementing a Rollback
137