Verifying The Ptp Configuration - Cisco Nexus 5000 Series Configuration Manual

Verifying the PTP Configuration

Verifying the PTP Configuration
Use one of the following commands to verify the configuration:
Table 4: PTP Show Commands
Command
show ptp brief
show ptp clock
show ptp clocks foreign-masters-record
show ptp corrections
show ptp parent
show ptp port interface ethernet slot/port
show ptp time-property
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
66
Purpose
Displays the PTP status.
Displays the properties of the local clock, including
clock identity.
Displays the state of foreign masters known to the
PTP process. For each foreign master, the output
displays the clock identity, basic clock properties,
and whether the clock is being used as a grandmaster.
Displays the last few PTP corrections.
Displays the properties of the PTP parent and
grandmaster clock.
Displays the status of the PTP port on the switch.
Displays the PTP clock time properties.
Configuring PTP