Configuration Examples For Switch Profiles - Cisco Nexus 5000 Series Configuration Manual

Configuration Examples for Switch Profiles

Command
show switch-profile name
show switch-profile name buffer
show switch-profile name peer IP-address
show switch-profile name session-history
show switch-profile name status
show running-config expand-port-profile
show running-config exclude-provision
show running-config switch-profile
show startup-config switch-profile
For detailed information about the fields in the output from these commands, see the Cisco Nexus 5000 Series
Command Reference.
Configuration Examples for Switch Profiles
Creating a Switch Profile on a Local and Peer Switch Example
The following example shows how to create a successful switch profile configuration on a local and peer
switch including configuring QoS policies; a vPC peer-link, and a vPC in a switch profile.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
24
Command or Action
Enable CFSoIP distribution on the local and the peer switch.
Example:
switch# configuration terminal
switch(config)# cfs ipv4 distribute
Create a switch profile on the local and the peer switch.
Example:
switch(config-sync)# switch-profile abc
switch(config-sync-sp)# sync-peers destination 10.1.1.1
Verify that the switch profiles are the same on the local and the peer switch.
Purpose
Displays the commands in a switch profile.
Displays the uncommitted commands in a switch profile, the
commands that were moved, and the commands that were
deleted.
Displays the synchronization status for a peer switch.
Displays the status of the last 20 switch profile sessions.
Displays the configuration synchronization status of a peer
switch.
Displays details about the port profile.
Displays the configurations for offline pre-provisioned
interfaces that are hidden.
Displays the running configuration for the switch profile on
the local switch.
Displays the startup configuration for the switch profile on
the local switch.
Configuring Switch Profiles
Purpose